Computer motherboards are the main circuit boards of a computer. They are responsible for the basic functions of the computer such as the input and output of data, the storage of data, and the processing of data. There are two types of computer motherboards: desktop and laptop. Each type has its advantages and disadvantages.
Read on to learn more about each type.

6 Different types of Motherboard form factors

In simple words Motherboard is an internal board that connects other parts such as processors/CPU (central processing unit), memory chips (RAM), graphic cards (GPU), video cards (VGA), hard disk drives (HDD) etc.. In desktop PCs motherboard connects CPU/RAM with graphic cards (GPU). In laptops motherboard connects CPU/RAM with hard disk drives (HDD). These are external boards that connect with CPU/RAM using connectors/sockets or pin slots (located on top/bottom sides).
Motherboard generally consists of multiple chipsets (integrated circuit packages), multiple buses that run parallel circuits (commonly referred as ‘pins’ or ‘pads’) that connect CPU/RAM with other chipsets/buses or pin slots located on top or bottom sides depending upon form factor i.e., desktop or laptop etc..

1. ATX

There are six different types of motherboard form factors, each designed for a different purpose. The six form factors are ATX, microATX, mini-ITX, FlexATX, BTX, and NLX. ATX is the most common form factor for desktop computers. It is designed to be a standard size so that it can be easily swapped out for another ATX motherboard if necessary.
ATX motherboards usually have four RAM slots, four PCI slots, and one or two PCI Express slots. MicroATX is a smaller version of ATX and is often used in budget computers. It has fewer features than an ATX motherboard, but it is still large enough to support a full-sized CPU and graphics card. MicroATX motherboards usually have two RAM slots, two PCI slots, and one PCI Express slot.
Mini-ITX is an even smaller form factor than MicroATX and is designed for use in very small computers. Mini-ITX motherboards usually have one RAM slot, one PCI slot, and one PCI Express slot. FlexATX is a variation of ATX that is designed to be more flexible in terms of size and shape. FlexATX motherboards can be used in both desktop and laptop computers.
BTX is a form factor that was designed to replace ATX. BTX motherboards are designed to be more efficient in terms of cooling and airflow. BTX motherboards usually have four RAM slots, four PCI slots, and one or two PCI Express slots. NLX is a form factor that was designed for use in low-profile computers.
NLX motherboards are smaller than ATX motherboards and have a more limited number of features. NLX motherboards usually have two RAM slots, two PCI slots, and one PCI Express slot.

2. MicroATX

Microatx motherboards are the smallest form factor that can be supported by full-sized cpu and graphics card. Microatx motherboards usually have two ram slots, two pci slots, and one pci express slot.

3. Mini-ITX

mini it x is an abbreviation of mini integration extended technology and it is a miniaturised pc computer mainboard standard which came into existence in or around year-2000 at intel tech day conference in san jose california usa by jim salter with the help of ibm engineers mark baker and dan mankin as a result of high popularity of slim and lightweight notebook computers.

4. FlexATX

Mini-ITX mainboards are becoming increasingly popular in the PC gaming and enthusiast communities. They offer a great balance of features and performance, and are much smaller and more affordable than their full-sized counterparts. FlexATX is a newer standard that is even smaller than Mini-ITX, and is becoming increasingly popular in the HTPC and mini-PC markets.

5. BTX

With Mini-ITX board sizes becoming more standardized around 4 cm (1½ inches) square x 2 cm (1 inch) tall, ATX started trending toward larger form factors as well—and then there was something called BTX (Before Thin ITX). Initially developed by Shuttle for Intel’s next generation CPUs (Gen7), BTX boards are smaller than ATX by about 1/2 inch all around; there’s no room for drive bays or other features because they don’t need them—and they also aren’t quite as rigid as ATX boards due to their smaller dimensions (note: thinner than most ATX boards). BTX’s smallest form factor board size is 12x12cm (4×4 inches), while its largest measures 14x14cm (5×5 inches).


BTX boards are becoming increasingly popular as Mini-ITX boards become more standardized around 4 cm (1½ inches) square x 2 cm (1 inch) tall. ATX boards are trending toward larger form factors, but BTX boards offer a more compact option that doesn’t sacrifice rigidity. BTX’s smallest form factor board size is 12x12cm (4×4 inches), while its largest measures 14x14cm (5×5 inches). EATX is another popular option for those looking for a more compact board size.

What are the 3 types of motherboard?

There are three main types of motherboard architectures that are being used currently in computers: ATX – A traditional ATX motherboard uses two main connectors at its center – ATX’s primary connector is PCI-E (a version of PCI) while its secondary connector is SATA/Molex/Fascia connector which is used for hard drives / optical drives / graphics cards / other peripherals (eGPU). While these days we rarely see traditional ATX motherboards being used anymore (because they’re not as popular as they once were), these motherboards are still used by manufacturers that prefer this architecture style (such as MSI / ASRock / Asus etc).

Which type of motherboard is best?

There are three main types of motherboard architectures that are being used currently in computers: atx, microatx, and mini-itx. While there are benefits and drawbacks to each type, ultimately it comes down to personal preference and what you’ll be using your computer for. Atx motherboards are the most common type and are ideal for gaming and general-purpose computing. They offer the most features and expansion options, and are the most compatible with aftermarket parts.
However, they’re also the largest and most expensive type of motherboard. Microatx motherboards are a smaller, more affordable option that are still compatible with a wide range of aftermarket parts. They’re a good choice for budget-conscious shoppers or anyone who doesn’t need the extra features offered by an atx motherboard. Mini-itx motherboards are the smallest and most affordable type of motherboard.
They’re ideal for basic computing or for building a small form factor pc. However, they have fewer expansion options and are less compatible with aftermarket parts.

What are the 10 parts of motherboard?

Which type of motherboard is best for gaming?

Generally speaking, as far as gaming goes; there’s no difference between desktop computers vs laptop computers vs tablets vs smart phones vs etc compared to each other when it comes down to your performance in games. There’s some differences between hardware or components but those differences only apply when your processor goes down as fast as your graphics card when you are playing high-end games such as Overwatch or Call Of Duty where if one goes down your other goes down pretty quickly too so if you have both paired together then they should not really make much difference as long as you have decent enough internet connection speeds at your house so if one slows down then everything else will slow down too or at least slow down considerably more than usual (If I were on a game like call of duty or any other online game then I would probably look into getting an upgrade for my router if I were already running on very low internet speeds).

What are the different types of motherboard explain?

most of the motherboards today include an intel or amd chipset ic to facilitate the various inputs and outputs between the computer components and the mainboard/cpu itself as well as controlling all the electrical interfaces between them for example ddr4-2133 ram will operate at different voltages with different size data bus widths than ddr3 memory operating at different speeds in the same socket type slot however with the same supply voltages. Motherboard manufacturers provide these complex specifications through the use of a type of shorthand called slot specification names which denote what type of socket type is used and its possible signal characteristics based on how the signals are routed to pins on the cpu-z connector of the component requiring power only and how small of a difference between the fastest clock speed supported by a processor of its generation etc. A compact flash card in an older pc is entirely different from a usb 3.0 pci express card capable of running faster than any speed of a current sata ssd in a desktop pc even though it may use the same physical interface connection connections as those mentioned above along with other chips needed for optimal operation of this device within the desktop case in general as well as how the cpu z header will be connected on a main board not built by the same company that made both of the main components unlike mobile phones which are proprietary in nature though they share a common linux operating system with the rest of the devices produced by a given manufacturer apart from some differences in build material quality in some models among other differentiating factors what’s more is that all computers tend to use the same power supply unit as sold by each company due to the standardization

Which one is a type of motherboard?

what is a cpu socket?a motherboard is the central component in a computer.
It contains all the components necessary to communicate with the rest of the system, including the processor, ram, hard drive, graphics card, and more. A motherboard can come in various types, including atx, micro-atx, mini-itx, and so on. The most common type is the atx motherboard.
The other three types are less common, and you can usually tell which one you have by looking at the back of your computer case. A cpu socket is a small hole on the motherboard that holds the processor. You can identify the type of cpu socket by looking at the model number on the processor itself.

What are the types of motherboards?

There are three basic types of motherboards available today for desktop computers, they are Plug-in/Socket-based motherboards (P/S), socket-based motherboards (S/B) and Plug-in card/Card-on-board (P/C/BOB) motherboards (P/C). These three types differ mainly in size and layout of their chipsets but they perform similar functions with respect to I/O functions such as I/O signals etc.). Other components such as memory modules (RAM) etc., do not play any role in determining type of motherboard as long as they are mounted correctly on compatible sockets or slots in socket-based motherboards). So we can easily say that these three main types don’t determine each other’s functionality but they simply vary in terms of layout design chipsets power supply etc., where sockets are used more commonly among these three main types which makes socket-based motherboards more compatible

What are the 3 types of motherboard in computer?

The motherboard is one of the most important parts of a computer. It is the main circuitry board that contains the components of the system that allows the computer to function. The motherboard connects the different parts of the computer together, including the Central Processing Unit (CPU), the Random Access Memory (RAM), the hard drive, and the optical drive. There are three different types of motherboards, based on their size and features.
The first type is the full-size ATX motherboard, which is the most common type found in desktop computers. It has the most slots and connections, and supports the largest variety of components.

What are the 4 types of motherboard?

The four types of motherboard are AT, Baby-AT, LPX, and NLX. Each type has its own advantages and disadvantages. AT motherboards were the first type of motherboard developed. They are larger in size and require more power than other types of motherboards.
However, they are also more durable and can support more expansion cards. Baby-AT motherboards are smaller in size than AT motherboards but still provide good expansion capabilities.

What are the 3 types of motherboard?

There are three main types of motherboard: ATX, MicroATX, and Mini ITX. ATX is the most common size, and supports both LGA 1155 and LGA 1150 motherboards. MicroATX is smaller than ATX, but supports more expansion slots and can fit more components. Mini ITX is the smallest size and only supports a single graphics card or CPU.

In conclusion ,the most common types include microATX motherboardsand miniATX motherboards . There are also other more advanced platforms such as microATXE and miniATXE motherboards .The differences between them lie in size ,relative dimensions(length ,width)and support for various typesof components such as video cards ,soundcards ,graphics cards ,memory modules etc . A full listof which boards support what components can be found here . The information provided therein canbe useful if one needs assistance in creating an objective argumentor proof in supportof any claim made by any subject matter expert in any subject area .
It would also be usefulif one needs help identifying experts in any area .

Similar Posts