The BIOS is a small program that is stored in a chip on the motherboard of your computer. It is responsible for starting your computer and loading the operating system. The BIOS is also responsible for storing information about the hardware components of your computer. It also contains the boot sequence that will load the operating system.
The BIOS is located on a small chip on the motherboard of your computer. The BIOS is responsible for storing information about the hardware components of your computer.

How to Update Your BIOS from Within Windows

Use these steps after restarting your computer so you can access your BIOS settings     1.) After restarting your computer click start and type botton bssetup into search box     2.) Once this opens click ‘System Update’ then select ‘Basic System Setup’ from ‘BIOS Settings’ tab 3.) This will bring up several tabs which will give you different options like ‘Hard Disk’, ‘RAM’, ‘Graphics Card’, ‘Sound Card’ etc 4.)
Click update & Restart now button 5.) You will then need to wait while your computer updates & reboots 6.) Once this has finished click ‘Reboot Now’ button 7.) You should then be able to access your BIOS settings 8.)
You can now see what version you are running 9.) If you are using Windows 7 select from these options if you are using Vista select from these options 10.)

How to Update Your BIOS from a Bootable USB Drive or CD/DVD

Use these steps after restarting your computer so you can access your BIOS settings     1.) After restarting your computer click start and type botton bssetup into search box     2.) Once this opens click ‘System Update’ then select Basic System Setup’ from ‘BIOS Settings’ tab 3.) This will bring up several tabs which will give you different options like ‘Hard Disk’, ‘RAM’, Graphics Card‘, ‘Sound Card’ etc 4.)
Click update & Restart now button 5.) You will then need to wait while your computer updates & reboots 6.) Once this has finished click ‘Reboot Now’ button 7.) You should then be able to access your BIOS settings 8.)

How to Update Your BIOS from DOS

step by step instructions of how to update your bios by using windows cd boot disc if you have windows vista or later versions on your personal computer and you want to update your system board’s firmware you can do so using an easy method by using a bootable windows® xp cd-rom drive first installed in your system and then follow the instruction below step by step in order to upgrade your motherboard`’s microcode driver…. press f10 on your keyboard to load the setup utility from the windows xp recovery console screen upon rebooting your system from your floppy you created for the cmos reset mentioned above… click on next to accept the disclaimer and click troubleshoot > advanced options> command prompt => once here press [enter] to continue into the configuration utilities where the path is located to mount the harddrive to desktop and hit enter again to confirm the change by pressing the enter key this time when the prompt appears ….. once these changes have been made you are ready to begin the procedure by downloading the latest drivers from the manufacturer’s website for your model computer listed bellow as follow updated each link to the respective pages extract the files to your harddisk and run the installer following the steps on its respective page to upgrade your drivers and finish the update process once you are finished with everything you should be able to use your pc as you normally do nomore problems encountered with the mobo anymore!!

!or check this link to update bios!

!

FAQS

If you’re having trouble with your computer’s motherboard, you may need to reset the cmos. This can be done by creating a bootable floppy disk and then rebooting your system from the floppy. Once you’ve rebooted, click on “next” to accept the disclaimer and then click on “troubleshoot > advanced options > command prompt.” Once you’re at the command prompt, press [enter] to continue into the configuration utilities.
In the configuration utilities, you’ll need to change the path to mount the hard drive to the desktop. To do this, press [enter] again when the prompt appears. Once you’ve made the changes, you’re ready to begin the procedure. To finish the update process, you’ll need to download the latest drivers from the manufacturer’s website for your model computer.
You can find a list of links to the respective pages below. Extract the files to your hard disk and run the installer, following the steps on the page to upgrade your drivers. Once you’ve finished updating your drivers, you should be able to use your pc as normal. You shouldn’t have any more problems with the motherboard.

Updating Your BIOS: In Conclusion

Updating your BIOS can be a tricky process, but it’s important to do if you want to keep your computer running smoothly. Follow the steps in this article and you should be able to update your BIOS without any problems. If you run into any trouble, be sure to check the manufacturer’s website for your model computer for more specific instructions.

How do I check my BIOS version Windows?

Windows 10 has different BIOS versions that can run with specific motherboard models – if your motherboard has an onboard audio chipset then there is a possibility that there may be different BIOS versions that can run with it depending on how old your motherboard is . For example if your motherboard has an on board Realtek audio chipset then there are two BIOS versions available for it – Version 1 (Default) and Version 2 (Elegant). You can check your version by pressing “F12” key during booting . It will display BIOS version information on screen .
If you don’t see any BIOS version information then try changing boot device order by pressing F10 key during booting . Then try changing back to default option by pressing F12 key during booting . Windows 10 versions do not support legacy devices such as SATA drives or IDE hard drives etc because they do not support AHCI mode .

How do I find my BIOS time and date Windows 10?

**Finding the BIOS time and date in Windows 10**

The BIOS time and date is stored in a special memory chip on your motherboard. This chip is powered by a battery, so it will keep the time and date even when your computer is turned off. To view or change the BIOS time and date, you’ll need to enter the BIOS menu.

How do I find my current BIOS version?

**to find the bios version:**
1.

How do I check my BIOS version Windows 10 hp?

To check your BIOS version on a Windows 10 HP computer, open the “Settings” app and navigate to “System and Security.” There, you’ll see a list of all of your installed software, including your BIOS version.

How do I check my current BIOS version?

To check your current BIOS version, you can use the System Information tool in Windows. This tool will show you your BIOS version under the System Summary section. You can also check your BIOS version by opening the BIOS setup utility. The BIOS setup utility is usually accessed by pressing a key during bootup, such as F2 or DEL.

Can you see BIOS version in Windows 10?

yes absolutely you can!
Each and every modern computer runs with a kind of firmware called bios or basic input output system which is nothing but a software helping the machine to boot itself and run software applications easily and efficiently without the need of turning on the computer’s hardware every time it runs these applications properly because the machine is programmed to do this in advance and save the hardware from unnecessary wear and tear.it is so simple but quite amazing to know that a computer must run some code before beginning its operations each time a user turns it on and only this code knows whether the system is going to boot or not.choosy users have the option to change the code of the operating system they wish to use but usually they are the ones who get the problems for which they are paying experts to help them fix such errors.so the initial launching of the program is good to follow by some enthusiasts as they know how to control their pc better but they do nothing productive instead of wasting time and resources on simple codes which can be easily managed by anyone.to get to know about the current working status or the version of the current running program the computer uses without using a diagnostic tool is simple just look for it by right clicking on my computer then properties and choose its tab drives.then double click on the disk c which contains the operating system files.you will see here two drives partitions and raw volumes.in any case the first drive you see is the disk containing the windows operating system and its files are raw volumes not partition but still it contains certain files and folders to see the actual status of a program you must have

Conclusion
In conclusion, if you want to check your current BIOS version, you can easily do so using the steps below. First, you’ll need to boot into Safe Mode. Once you’re in Safe Mode, you’ll need to locate the file called Bios.bin. This file is located in C:\Windows\System32\drivers\Bios.
Once you’ve found the file, double click on it to launch the program.
A window will pop up asking you to select a language. Select English United States from the list and press Next.
The next screen asks you to choose whether you’d like to update your BIOS or restore your system defaults. Choose Update and press Next.
You’ll then be asked to confirm your choice. Press Yes to continue.
When the process has finished, you’ll be returned to the main menu.
From here, you can reboot your computer normally or restart it in Normal mode.

Similar Posts